Yongjia · Polyurethane Equipment

Automatic PU Adhesive Dispensing Machine for Panel Production

Panel bonding equipment should be selected from the substrate, adhesive chemistry, application rate and production rhythm. Manual application, automated bead dispensing and roll coating are different processes.

  • Insulated and composite panel bonding
  • Sheet-to-core adhesive application
  • Continuous bead or pattern dispensing
  • Configured roll-coating processes
Get a Quote

Where This Equipment or Process Fits

The final configuration is matched to the finished product, material system and production target. The application list below is a routing guide, not a claim that one standard configuration covers every process.

  • Insulated and composite panel bonding
  • Sheet-to-core adhesive application
  • Continuous bead or pattern dispensing
  • Configured roll-coating processes

Production Process

  1. Confirm panel materials and surface preparation.
  2. Define the adhesive components, ratio, viscosity and pot life.
  3. Select the application pattern and required coating weight.
  4. Run an adhesive application test before production acceptance.

Technical Information to Confirm

ItemWhat must be confirmed
PanelMaterial, width, thickness and surface condition.
AdhesiveOne- or two-component system, ratio and supplier TDS.
Application rateg/m² or another agreed unit with test conditions.
Line speedState panel width, coating weight, material and machine configuration.
Mixing headDefine flushing and cleaning for the selected chemistry.
Environmental claimsUse measured emissions or compliance evidence only; no absolute “no pollution” wording.

Scope, Evidence and Acceptance

A headline speed such as 8 m/min is meaningful only with the panel width, adhesive load and operating conditions. It is not used as an unconditional line guarantee.

Before order, the proposal should identify the selected model or system, included and excluded equipment, utilities, buyer responsibilities, test material, acceptance criteria, documentation and service scope. Values without a model, unit or condition are not used as purchasing guarantees.

Send the product drawing, material data and target output for an engineering configuration review.

Request Configuration

Related Equipment and Next Steps

Interested in this equipment?

Get specifications, pricing and lead time from Yongjia's engineers.

Request a Quote